Wiper Blade Installation Guide
FARTILO
Installation Guide & Video Support
Select Your Wiper Blade Model
Choose your series to view the matching installation guide and video.
Step-by-Step Installation Guide
No tools required. Complete installation in under 5 minutes.
1
Lift
Raise the wiper arm away from the windshield until it locks upright at 90°.
2
Remove Old Blade
Press the release tab and slide the old blade off the wiper arm hook.
3
Align New Blade
Position the new blade's connector directly over the wiper arm hook.
4
Click to Lock
Push the blade firmly until you hear an audible click — it's now secured.
5
Test & Lower
Give the blade a gentle tug to confirm it's locked, then lower the arm back onto the windshield.
Installation Video
Select your series to load the matching video.
Tap a series above to load the video
818 Series selected
Frequently Asked Questions
Common installation and usage questions.
Check your vehicle owner's manual or the driver-side door jamb sticker — both list the recommended wiper blade size. You can also measure the existing blade length in inches. The packaging label shows compatible vehicle makes and models for each series.
Yes — all Fartilo wiper blades are designed for tool-free installation. Simply lift the arm, press the tab, slide out the old blade, and click the new one into place by hand. No screwdrivers or wrenches are needed.
The packaging includes multiple adapter connectors — try switching to a different adapter that matches your arm style (J-hook, pin, bayonet, etc.). Refer to the adapter chart printed inside the box for step-by-step guidance on selecting the correct connector.
Most automotive experts recommend replacing wiper blades every 6–12 months, or sooner if you notice streaking, skipping, or squeaking during operation. Harsh winters and intense UV exposure can accelerate rubber wear.
Clean the windshield and the rubber blade edge with a damp cloth to remove oil or debris. If streaking continues, verify the blade is fully seated on the arm hook and that the wiper arm is applying even pressure across the full length of the blade.
Fartilo blades ship with a universal adapter kit covering the most common arm types: J-hook (9×3mm and 9×4mm), side pin, and top lock. Refer to the adapter compatibility chart printed inside your packaging box for detailed connector identification.